92.5WNiFeMo Tungsten Alloy Rod

1. What's 92.5WNiFeMo Tungsten Alloy Rod?
92.5WNiFeMo tungsten alloy rod is high density tungsten alloy rod manufactured with approximately 92.5% tungsten (W) as the main component and nickel (Ni), iron (Fe), and molybdenum (Mo) as alloying elements. Tungsten provides high density and excellent radiation shielding performance, the nickel-iron binder phase improves toughness and machinability, and molybdenum enhances strength, wear resistance, and high-temperature stability. CTIA’s tungsten alloy rod features high density, high strength, good wear resistance, and stable comprehensive performance, and is widely used in aerospace counterweights, precision instruments, high-end equipment, and special functional structural components.

2. Features of CTIA’s 92.5WNiFeMo Tungsten Alloy Rod
(1) High Density
Approximately 92.5% tungsten content and density of 17.5–18.5 g/cm³ enable high mass concentration within limited space for counterweights and inertial components.
(2) High Strength
Synergistic strengthening effect of nickel-iron binder phase and molybdenum provides tensile strength of 700–900 MPa, improving load-bearing capacity and structural stability.
(3) Good Wear Resistance
Hardness of approximately 25–35 HRC provides good wear resistance and maintains dimensional stability during long-term service.
(4) High-Temperature Stability
Molybdenum addition improves high-temperature strength and deformation resistance, supporting applications requiring high temperature and performance stability.
(5) Excellent Radiation Shielding Capability
High atomic number and high density of tungsten provide effective absorption of X-rays and gamma rays for radiation shielding components.
(6) Good Machinability
Improved toughness and machinability compared with pure tungsten materials enable precision processes such as turning and grinding.

3. Applications of CTIA’s 92.5WNiFeMo Tungsten Alloy Rod
(1) Aerospace Counterweights
Used in satellite attitude control counterweights, aircraft balance weights, aerospace engine inertial counterweights, and control system inertial components to achieve high mass concentration within limited space and improve equipment stability.
(2) Precision Instruments
Used in gyroscope counterweights, inertial measurement device components, vibration control elements, and precision mechanical balance weights to meet high precision and dimensional stability requirements.
(3) High-End Equipment Manufacturing
Used in automation equipment counterweights, precision machine tool balancing components, robot inertial components, and high-density structural components under special operating conditions to improve equipment reliability.
(4) Medical Protection
Used in shielding components of X-ray inspection equipment, radiation protection components, and medical collimator structural components for effective radiation shielding.
(5) Special Functional Components
Used in engineering components requiring high specific gravity, high strength, and wear resistance, such as balancing components for high-speed rotating equipment, impact load components, and functional components operating under special conditions.

4. Specifications of CTIA’s 92.5WNiFeMo Tungsten Alloy Rod
(1) Grade: 92.5WNiFeMo
(2) Tungsten Content: 92.5%
(3) Density: 17.5–18.5 g/cm³
(4) Diameter: 3–100 mm, customizable
(5) Length: 100–1000 mm, customizable
(6) Surface Conditions: Ground, polished, customizable

CTIA GROUP has specialized in tungsten alloy manufacturing for nearly 30 years, ensuring stable density, uniform microstructure, and reliable product performance through precise control of tungsten powder purity, alloy composition, and machining accuracy. CTIA supplies high-density tungsten alloy rods in W-Ni-Fe, W-Ni-Cu, and W-Ni-Fe-Mo series, with grade selection, specification customization, and precision machining available to meet application requirements in aerospace counterweights, medical protection, precision instruments, and high-end equipment.

For any inquiry, please contact tungsten alloy manufacturer: CTIA GROUP

Email: sales@chinatungsten.com

Tel: 0086 592 5129696 / 0086 592 5129595

Website: tungsten-alloy.com

WeChat: