92.5WNiFe Tungsten Alloy Rod

1. What's 92.5WNiFe Tungsten Alloy Rod?
92.5WNiFe tungsten alloy rod is tungsten heavy alloy rod based on 92.5% tungsten (W), with nickel (Ni) and iron (Fe) added as binder phases, providing high density, high strength, and good plasticity. CTIA’s tungsten alloy rod is manufactured through powder metallurgy processes, including powder mixing, pressing, liquid phase sintering, and precision machining. It features high density, high strength, high hardness, good machinability, and excellent radiation shielding capability, and is widely used in aerospace counterweights, medical protection, precision instruments, and high-end equipment.

2. Chemical Composition of CTIA’s 92.5WNiFe Tungsten Alloy Rod
92.5WNiFe tungsten alloy rod is a W-Ni-Fe series high specific gravity tungsten alloy. By adjusting the ratio between tungsten phase and binder phase, the material achieves a balance between high mass density and good mechanical properties. Its typical chemical composition includes:
(1) Tungsten (W): 92.5%
(2) Nickel (Ni): 5.0%–6.0%
(3) Iron (Fe): 1.5%–2.5%
The tungsten phase provides high density, high strength, and radiation absorption capability, while the nickel-iron binder phase improves toughness and machinability.

3. Physical Performance of CTIA’s 92.5WNiFe Tungsten Alloy Rod
92.5WNiFe tungsten alloy rod features a stable microstructure and excellent overall performance. The main physical parameters are as follows:
(1) Density: 17.5–18.5 g/cm³
High-density characteristic enables large mass configuration within limited space.
(2) Tensile Strength: approximately 700–900 MPa
High load-bearing capability meets structural stability requirements under complex operating conditions.
(3) Hardness: 25–35 HRC
Good hardness and wear resistance help maintain long-term dimensional stability.
(4) Elongation: 5%–15%
Better plasticity and machinability help improve processing performance compared with pure tungsten materials.
(5) Elastic Modulus: 320–350 GPa
High stiffness helps reduce structural deformation.
(6) Coefficient of Thermal Expansion: 5 × 10⁻⁶/K–6 × 10⁻⁶/K
Low coefficient of thermal expansion helps maintain good thermal dimensional stability.

4. Applications of CTIA’s 92.5WNiFe Tungsten Alloy Rod
92.5WNiFe tungsten alloy rod features high density, high strength, good machinability, and excellent radiation shielding capability, and is widely used in high-performance structural components and functional parts.
(1) Aerospace Counterweights
Used in aircraft balance counterweights, inertial components, and attitude control components to achieve high mass concentration in compact dimensions.
(2) Medical Equipment Shielding
Used in X-ray and gamma-ray radiation shielding components to meet radiation protection requirements.
(3) Precision Instrument Manufacturing
Used in inertial components, vibration control components, and high-precision mechanical structures.
(4) High-End Equipment
Used in special functional components requiring high specific gravity and high stability.
(5) Mechanical Manufacturing
Machined into high-density components to meet complex structural application requirements.

5. Specifications of CTIA’s 92.5WNiFe Tungsten Alloy Rod
(1) Grade: 92.5WNiFe
(2) Tungsten Content: 92.5%
(3) Density: 17.5–18.5 g/cm³
(4) Diameter: 3–100 mm, customizable
(5) Length: 100–1000 mm, customizable
(6) Surface Conditions: Ground, polished, customizable

CTIA GROUP has specialized in tungsten alloy manufacturing for nearly 30 years, with extensive experience in tungsten alloy rod production using mature powder metallurgy processes. Strict control of raw materials, alloy composition, sintering processes, and machining accuracy ensures stable density, uniform microstructure, and reliable product performance. CTIA supplies high density tungsten alloy rods in W-Ni-Fe and W-Ni-Cu series, including grades such as 90WNiCu, 92.5WNiFe, 92.5WNiCu, and 95WNiFe, with customized specifications, precision machining, and application-specific solutions available for aerospace, medical protection, precision manufacturing, and high-end equipment applications.

For any inquiry, please contact tungsten alloy manufacturer: CTIA GROUP

Email: sales@chinatungsten.com

Tel: 0086 592 5129696 / 0086 592 5129595

Website: tungsten-alloy.com

WeChat: